conference seats with microphone and table
conference seats with microphone and table
A conference seat or an Auditorium seat with a microphone and a table is one of the most complicated areas in the auditorium seating.
And for that you need a good manufacturer with experience who can handle all the challenges that such a project poses.
We are able to adapt most of our seats models according to the type of microphone you will be requesting to install in the seat.
All you need to do is to give us a good diagram of the cable and the microphone that is going to be used, and preferably if you can send us
a physical example of the cable.
We have developed many models of conference and auditorium seating with microphone and will be happy to share our knowledge.
In addition to the microphone, you can also install a socket that is suitable for connecting a charger for a mobile phone or connecting a
charger for a laptop and more…
For the table in a seat with a microphone it is recommended to be apply as anti panic table system or if the budget and the space
allows it so you can also set a separate table from the seat in front of the seat and allows comfortable work space.
If you have any questions about conference seat or an Auditorium seat with a table and a microphone, please contact us and we
will be able to produce any model according to your demand.
- Published in 5 years warranty for Auditorium & Stadium chairs, Acoustic panel made in turkey, Acoustic panel manufacturer, Acoustic solutions, Aiming to achieve the right factory for Auditorium seating, Auditorium project, Auditorium seat with a ventilation foot, Auditorium seating, Auditorium seating manufacturer in Turkey, Auditorium seats, Cinema chair manufacturer, conference seats, conference seats manufacturer, conference seats with microphone and table, factory for Auditorium seating, Fixed Seating in affordable price, professional seating solution, seating-manufacturer, seats production, stadium seats manufacturer, wooden Auditorium
mass production of stadium seats
mass production of stadium seats
Our mass production of stadium seats currently focuses on our two main models which one of them is STADIUS220 and second one is
STADIUS401 we have been producing both of these models for decades and in mass production quantities for international stadiums and
government projects worldwide.
The demand for these stadium seats, especially as we said of the models mentioned above, only increases and increases over the years,
we are able to produce more than 6,500 seats per week from each one of these models.
That is mean, within one month we will be able to supply about 30,000 seats from each one of these models.
Which means that in a period of 7 months we can produce more than 200,000 seats from each one of these models.
Many costumers are askıng us how many seats of the model STADIUS220 can enter in one 40 feet container?
So here are all the answers:
Truck: 3750 units of Stadium seat model STADIUS220
Big Truck : 9000 units of Stadium seat model STADIUS220
40 ‘Container: 6500 units of Stadium seat model STADIUS220
Also many costumers are askıng us how many seats of the model STADIUS401 can enter in one 40 feet container?
So here are all the answers:
Trucks: 600 units of Stadium seat model STADIUS401
Big truck: 1730 units of Stadium seat model STADIUS401
40 ‘Container: 1400 units of Stadium seat model STADIUS401
Mass production of stadium seats That’s what we specialize in! mass production of stadium seats That’s what we love to do!
To do mass production of stadium seats this requires strict adherence to high production conditions that we maintain in our factory.
To do mass production of stadium seats requires high level inspection and a commitment to ensure that the seats will be 100% equally
same in shape and in color. And this is our job in any production process of stadium seats and chairs.
When it comes to the mass production of stadium seats we offer you not to take any unnecessary risks and work with us to achieve the
success of your project hundred percent and without manufacturing errors.
Mass production is not a child’s play and you can not allow yourself to make a mistake in your manufacturer’s choice.
This is also the quality of a product that must be under the highest criteria and at the same time seats that must be provided in time
according to the agreed agreement. We have already heard of many cases where the seats were missing in time and games had to be
delayed and the contractor went into thousands of dollars penalty just because his manufacturer did not meet the schedule.
Mass production of stadium seats under the best conditions is our responsibility and our mission so definitely contact us when you need
mass production and fast production on time of stadium seats.
export@seatupturkey.net +905427196712
- Published in A players' seat, Aiming to achieve the right factory for Auditorium seating, Auditorium seating manufacturer in Turkey, Cinema chair manufacturer, conference seats manufacturer, factory for Auditorium seating, Factory for Plastic Stadium chairs, Fixed Seating from Turkey in affordable price, Golf court seating, hockey chairs, ice hockey seating solutions, mass production of stadium seats, plastic stadium chair, players' bench shelter, professional seating solution, seating-manufacturer, seats production, sport courts, stadium chairs, stadium contractor, stadium project, stadium seat, stadium seats manufacturer, Technology in Stadium, tennis court, Turkish Exporter, Turkish manufacturer, VIP seat
A players’ seat, players’ bench shelter
At the same time, it is possible to produce the seat with handrests and cup holders that matches the size of the water bottles.
Our players seat is based on our VIP 500 model.
We are also capable of producing a complete solution for the players’ shelter, which includes the bench and the roof of the shelter,
which is resistant to the sun and is resistant to stone and object damage.
according to FIFA and EN standards players’ shelter must to contain 11 seats for the main players plus replacement players and the team
staff of the group. The recommendation is in total 18 seats per players’ bench shelter.
Please review the photos below from our last Stadium project.
- Published in factory for Auditorium seating, plastic stadium chair, players' bench shelter, professional seating solution, seating-manufacturer, sport courts, stadium chair, stadium chairs, stadium contractor, stadium project, stadium seat, stadium seats manufacturer, tennis court, Turkish manufacturer, VIP seat
plastic stadium chair
- Published in Aiming to achieve the right factory for Auditorium seating, Cinema chair manufacturer, conference seats manufacturer, factory for Auditorium seating, Fixed Seating in affordable price, hockey chairs, Home cinema chair, plastic stadium chair, professional seating solution, seating-manufacturer, sport courts, stadium chairs, stadium contractor, stadium project, stadium seat, stadium seats manufacturer, Technology in Stadium, Turkish Exporter, Turkish manufacturer
Auditorium seat with a ventilation foot
- Published in Acoustic wooden panel, Aiming to achieve the right factory for Auditorium seating, Auditorium project, Auditorium seat with a ventilation foot, Auditorium seating, Auditorium seating manufacturer in Turkey, Auditorium seats, Auditorium seats are art, Cinema chair manufacturer, conference seats manufacturer, economical solutions for building stadiums in low cost, factory for Auditorium seating, Fixed Seating from Turkey in affordable price, professional seating solution, seating-manufacturer, stadium seats manufacturer, Turkish Exporter, Turkish manufacturer, wooden Auditorium
Seatup Turkey the right manufacturer for seating solutions
Well the best you can do is to go and visit the company before you place an order…
or if you cant go by yourself send someone you know to do that for you… if you also can not do that so try to find if their address is on
Google map or not.
That will give you some information. So be careful and don’t forget to check well who is the company you are working with before placing
an order.
We are here and we are open for your visit in both our factory and our showroom in Bursa an hour drive from Istanbul.
Thank you.
SeatUp Turkey® & Acoustima®
+902249996707
www.seatupturkey.com.tr / www.seatupturkey.net
Sales office:
Altınova Mh. İstanbul Cd. Buttim iş Merkezi
C Blok No: 424/5 Ofis No: 3160
Osmangazi / BURSA / TURKEY
Zip code: 16250
- Published in Acoustic solutions, Aiming to achieve the right factory for Auditorium seating, Auditorium project, Auditorium seating, Auditorium seating manufacturer, Auditorium seating manufacturer in Turkey, Auditorium seats, Cinema chair manufacturer, cinema seating, conference seats manufacturer, factory for Auditorium seating, Fixed Seating from Turkey in affordable price, Fixed Seating in affordable price, Home theater seat, perfect home cinema chair & home theater seat, professional seating manufacturer, professional seating solution, seating-manufacturer, stadium seats manufacturer, Turkish Exporter, Turkish manufacturer, VIP seat, wooden Auditorium
Seating Manufacturer
1. Research & Development
The Research and Development what so called R&D’s is an important role in our company and this is what makes us able to be a leading company for Auditorium and Stadium chairs and furniture for public buildings.
2. Design & Project
Our Design and Project department open for your new ideas and offers and can support your project from a dream to a final realty. they will help you to convert raw materials into living products and to translate simple products into living Auditorium environments. The outcome is always a harmony of great qualities of raw materials with our professional design which based on our 20 years of knowledge and experience.
3. Metal Section
In this department we take care to weld and manufacture the metal parts of the seat this is where Hot dip galvanized metal has been made
into leg, foot and the back structure of the seat. high quality electrostatic paint is being apply.
4. Wood Section
In this the department where we process various types of wood into sections such as writing surfaces for auditorium chairs, as well as
wood back shield for various seats and of course wooden armrests. Color resistant in 4 layers applied.
5. Plastic Injection
Here we produce essential Anti flame Polypropylene parts for our seats such as armrests, plastic plugs, backseat covers , and of course
here we produce our plastic seats for stadiums in commercial capes.
6. Foam Injection
This is the place where Anti flame polyurethane is injected into metal molds and so here we produce hundreds of types of foam shapes for
back seats and seats for all the models which we produce.
7. Sewing and upholstery
Here thousands of Meters of fabric and artificial leather arrive and they are cut by cutting a laser machine and then they are sewn in our
sewing workshop for the back seats and seats, then later the They will then wear the back of the seat and the seat in the garment sewn for
them.
8. Packaging and assembly
After the production has been completed and before loading the container or truck to bring the goods to the customer we must pack
carefully the seats. Most of the time we send the seats as for self assembly and then costumer installs himself or we are required to send
our team to help with the installation.
In any case, all the parts are packed carefully and in a proper packaging, which keeps the product from injuries and blows that the product
may absorb on the way.
We hope to continue to be one of the best Seating Manufacturer in the world!
- Published in Acoustic panel made in turkey, Acoustic panel manufacturer, Auditorium project, Auditorium seating, Auditorium seating manufacturer in Turkey, Auditorium seats, Cinema chair manufacturer, cinema seating, conference seats, conference seats manufacturer, Fixed Seating from Turkey in affordable price, Fixed Seating in affordable price, movie theaters, professional seating manufacturer, professional seating solution, seating-manufacturer, stadium chair, stadium seats manufacturer
perfect home cinema chair & home theater seat
perfect home cinema chair & home theater seat
When you want a Perfect home cinema chair you are probably expecting a seat that has other features from a regular movie theater seat
which you can find in a normal neighborhood movie theater.
So our home theater seats is just for you. We produce seats for the home cinema that have a button on the side of the seat armrest.
When you press the button the back cushion will move back with the opening of the leg cage which will be extended and you can control
the seat angle from the usual sitting position to full lying position.
Of course, there are cup holders in this home cinema chair & home theater seat and if it necessary for you we can produce the cup holder
with the possibility of heating or cooling the drinks.
You can also add other kinds of custom-made features such as folding dining table that will give you a perfect home theater experience.
Where else are these seats used?
Dentists or private clinics also order these seats from us and use them in their clinic for the convenience of patients.
Even at airports in VIP rooms these seats are being used, Of course hotels or luxury shopping spaces are also using them,
And then there are cinemas that have VIP rooms which were they are using these types of home cinema chair & home theater seat.
There are 4 main types of home cinema chair & home theater seat which we produce in our Factory in Bursa city in Turkey,
And as mentioned you can make new additions to these seats provided that the number of seats in your order is large enough.
And these are our 4 main types of home cinema chair & home theater:
CN 1000 – VIP Home Cinema
CN 1001 VIP Home cinema with motor
CN 1002 VIP Home Cinema
CN 1003 VIP Cinema chair
The conclusion is that if and when you need a home theater chair so we are the right address and your responsible choice! Do not forget it.
Fixed Seating in affordable price
Fixed Seating in affordable price
As you all know affordable price for fixed Seating solution is needed for: Auditorium hall or for your Concert Halls & Auditoriums ,
Convention Centers ,Hotels & Conventions, Movie Theaters & Cinemas, Parliament Buildings, Sport Stadiums, Theaters,
Universities& Schools.
SeatUp Turkey is an expert manufacturer that specializes in fixed Seating since 1995.
So with our 20 years of experience we will know how to produce for you the fixed Seating solution which you need for your building.
Whether if it is Multipurpose Spaces, Conference Rooms, Convention Centers, Concert Halls & Auditoriums, Parliament Buildings,
Multipurpose Macro-spaces, Sport Stadiums, Theaters, Movie Theaters & Cinemas, Airports & Stations, Universities& Schools,
Ferries & Cruise Ships, Hotels & Conventions, Clinics & Hospitals, Religious Centers.
For each one of these sites we have the right fixed Seating solution.
Our project department team is ready to find the best solution with best matching seat for your specific need.
Yes you are at the right address for high quality theatre chairs, comfortable cinema seatings, durable stadium chairs, high-end fixed chairs
with hundreds of available models and custom made seats.
Our seating concepts based on Adjusting the seat to the human body, and the result is a seat which is suitable for long hours of sitting
without feeling pain or uncomfortable.
The fast easy way to choose the right fixed Seating solution for you will be by first understanding if you want your seat to be with mono leg
or double leg?
If you need seat with mono metal leg so you should review our Diamond series and our VIP series.
If you need seat with double leg so review our Basic series or our Elegant series.
Contact us SeatUp Turkey is an expert manufacturer that specializes in fixed Seating since 1995.
with our 20 years of experience we will know how to produce for you the fixed Seating solution which you need for your building.
Whether if it is Multipurpose Spaces, Conference Rooms, Convention Centers, Concert Halls & Auditoriums, Parliament Buildings,
Multipurpose Macro-spaces, Sport Stadiums, Theaters, Movie Theaters & Cinemas, Airports & Stations, Universities& Schools, Ferries &
Cruise Ships, Hotels & Conventions, Clinics & Hospitals, Religious Centers.
For each one of these sites we have the right fixed Seating solution so just Contact us SeatUp Turkey.
SeatUp Turkey is an expert manufacturer that specializes in fixed Seating since 1995. with our 20 years of experience we will no how to produce for you the fixed Seating solution which you need for your building.
Whether if it is Multipurpose Spaces, Conference Rooms, Convention Centers, Concert Halls & Auditoriums, Parliament Buildings, Multipurpose Macro-spaces, Sport Stadiums, Theaters, Movie Theaters & Cinemas, Airports & Stations, Universities& Schools, Ferries & Cruise Ships, Hotels & Conventions, Clinics & Hospitals, Religious Centers.
Concert Halls & Auditoriums ,Convention Centers ,Hotels & Conventions, Movie Theaters & Cinemas, Parliament Buildings, Sport Stadiums, Theaters, Universities& Schools. Conference rooms, theaters, wedding halls, cinemas, opera houses, shopping malls, restaurants, radio and TV studios, offices, crowded offices, hotline centers, call centers, shooting ranges, fitness centers, call centers, swimming pools, wedding rooms, conservatory, study halls.
Auditorium seats are art
Auditorium seats are art
Auditorium seats like any furniture used in public buildings must be aesthetically designed and pleasant for those who are going to use it.
Any Auditorium hall is an unforgettable experience for users.
When visitors are coming into an hall where the seats are not comfortable and clean they will probably remember it forever
And it will affect their decision whether to go back and visit the same hall or never to visit there again.
If they were comfortable and pleasant they would also want to visit the same hall and would also recommend new friends to go and visit .
Therefore, your investment in the seats to the Hall is worthwhile and it is not desirable to compromise on the quality of the seats,
but our subject here today is not only the quality of the seats, but also the fact that the more artistic the seats will be it will attract a larger
audience.
Therefore, we must ensure that the Auditorium seating will include the following 3 characteristics:
1. A comfortable and healthy seat that is built for a long hours of sitting. In other words, an orthopedic seat for human.
2. A quality seat that can hold for many years at least 10 years without the need for renovation or replacement.
3. A seat that has an artistic touch and is aesthetically high level that attract more and more visitors and that is adding charm in space.
If you consider these three points when you are buying auditorium seats then there is no reason why you should not succeed in this
business.
Remember that seats that are both comfortable and durable and strong and beautiful and artistic are what the audience wants from you in
The end, and if you will choose to work with SeatUp Turkey then there is no reason why you should not enjoy a reasonable and
reasonable price.
Well, how to choose an artistic Auditorium seat model?
First it is also matter of budget… if you have very limited budget and you lack of time so choose from our Basic series.
If you have little more time and little more money so you can choose from our Elegant series.
And of course if money is not the issue for you so go on our VIP series.
we are here to serve you and to give advice free of payment.
www.seatupturkey.net
export@seatupturkey.net
+905427196712
- Published in Acoustic panel manufacturer, Auditorium project, Auditorium seating, Auditorium seating manufacturer, Auditorium seats, Auditorium seats are art, cinema hall, cinema seating, conference seats, conference seats manufacturer, movie seats, movie theaters, professional seating solution, stadium seats manufacturer, VIP seat, wooden Auditorium
Interview with our satisfied customer from Russia
Our costumer service Interview with our satisfied customer from Russia.
The customer service representative of our company Mrs. Salin Yaldiz called yesterday to hear from our customer in Russia if he was satisfied with the goods which we were deliverd them last month and this is what he told her on the phone:
Mr. Waldemir What do you think is special in the service that Seatup TR Ltd provides?
First of all it is that you can communicate quickly with them and get a fair price immediately on the same day you requested a quote. The second thing is that I can tell you that they make their own seats because I visited their factory a few times in Turkey in the city of Bursa and they have a very advanced and impressive production line.
And you told me that they also produced for you the acoustic panels?
Yes right which is really good point about them. For us it was very good because our project needed both seats and panels.
And do you think it’s good that both the seats and the panels one company was producing?
It was certainly a huge advantage for us because we worked with one company in this case it was Seatup Turkey and they provided us with everything we needed seats and chairs and it saved us a lot of time because instead of we had to deal with two companies one company created everything for us and sent it all in one container 40 DC.
I think a lot of our success came from cooperation with seatup Turkey company and I would certainly be happy to work with them again.
Okay, thank you very much for answering our questions and for agreeing to share.
We wish you continued enjoyable work and that we will bring together many more successful projects.
Qatar’s finance minister says the country is spending $ 500 million a week for the World Cup
Qatar’s finance minister says the country is spending $ 500 million a week ahead of the World Cup
According to Ali Shaarif al-Amadi the World Cup in 2022 will be “the most expensive of all time.” The amount covers the expenditure on stadiums and other projects, including roads, a new airport and hospitals.
Qatar’s finance minister has discovered that the country spends about $ 500 million a week on projects to host the World Cup in 2022.
Ali Shaaref Al Amedi said the amount covered the expenditure on stadiums and other projects, including roads, a new airport and hospitals. The expenses, according to which, will continue at the same rate over 2021.
“We spend close to $ 500 million a week on projects,” El Amedi told the Associated Press news agency. “And we will continue with this for at least 3-4 years, so that we will meet the goals and be ready for 2022”
He added: “Ninety percent of the contracts of 2022 have already been signed, this does not mean only stadiums, we are talking about roads, railways, ports, airports, all the jobs started, even hospitals. We want to look like we’re still painting the place when people start coming to the country. ”
“Al-Amedi added that the World Cup in 2022 would be” the most expensive of all time, “but added that the spending, which speaks of an increase of about $ 200 billion in total, is about a fundamental revolution in the country, And falling prices of gas and oil because it is separated by a special fund for the World Cup.
He added that Qatar was “very comfortable” with oil prices that had fallen since 2014.
3D panels Design Competition!
Now we offer you 50% discount on our 3D Acoustic panels to those who will offer us new shapes for 3D panels. Your drawing should be sent to our email address export@acoustima.com and we will get back each one of you in 24 hours with answers and we will also announce in this forum about the winners of the competition.
The winners of the competition will get 50% discount on our 3D panels!!!
So are you going to suprise us with your new innovative design ideas? This campaign starts today and runs until 10.3.2018
And for the meantime watch our Acoustima spin® panel!
The Acoustima spin® panel is now available at a low price in a size of 60×60 per each panel… The ultimate solution for those looking to get high acoustics performance together with an impressive aesthetic look and innovative design,
The installation is very simple, use wall glue and just paste it.
The main use of the panel is mainly in cinemas, but many also choose to use it in auditorium and conference rooms in the public and private sectors.
A new idea that came up is actually why not use the panel in preparing partitions between office desks.
Or it is also possible to create acoustic sitting pods areas using this panel or other panels from our three-dimensional acoustic panel series .
- Published in 3D Acoustic panels, 3D panels, Acoustic panel made in turkey, Acoustic panel manufacturer, Acoustic solutions, Auditorium seating, Auditorium seating manufacturer, cinema hall, cinema salon, cinema seating, conference seats, conference seats manufacturer, Genel, movie seats, movie theaters, professional seating solution, VIP seat
Wooden seatback or upholstered seatback?
Today we are going to talk about what is better Auditorium seat with a wooden seatback? Auditorium seat with a plastic seatback? Or simply an auditorium seat with full upholstery seatback?
The people who prefer the back of the seat with some cover will say that it is better not to get dirty and not hurt, especially in cinemas and in the halls where young students or teenagers use to leaning in rows to kick or put the shoes against the back of the seat which causes not to see dirty and may even damage the upholstery himself.
And certainly more so in stadiums or gymnasiums and sport courts, Some of the audience have a tendency to kick or climb on the back of the seat, and in such a situation your seats must to have a particularly hard plastic back otherwise they won’t keep long.
Well what would be cheaper price with padded upholstery back or polyproplane (plastic) back ?
The truth is that there should not be a big difference in price between a plastic back and an upholstered back,
But the big difference in price comes when you want the back of the seat to be made of wood cover, and certainly a 18mm or 20mm polywood shield.
Those who prefer the back to be wooden usually want it for the prestigious design which it gives to the appearance of the auditorium hall, and of course also because they are concerned about the back of the seat that may be damaged when the audience rubs or kicks it with their shoes. Keep in mind that all of our chair and auditorium models are always upholstered with fabric or artificial leather which is easy to clean and very durable for water and detergents. So it’s more important that you make your decision by the design which you prefer and not because that you are worried from the durability of the fabric / leather .
Another solution that can be applied which is preferred in most cases is wooden or plastic shield at the bottom of the seatback. In such a situation, you also take care of the back of the seat and keep it from kicking legs of those sitting in rows and you still get the appearance of a padded back.
Ultimately, the decision must be made both for design reasons and for maintaining cleanliness and visibility of the seat, and ultimately the decision is also subject to the amount of the project budget.
In conclusion, a solution for those who are afraid for the life of the seats but do not have the money for a full wooden back, is to use a plastic back cover or half plastic cover at the bottom of the seatback which will prevent friction in the area of the shoes of the audience.
- Published in Acoustic panel made in turkey, Acoustic panel manufacturer, Acoustic solutions, Acoustic wooden panel, Auditorium seating, cinema hall, cinema salon, cinema seating, conference seats, conference seats manufacturer, Genel, professional seating solution, stadium chair, stadium chairs, stadium seat, stadium seats manufacturer
A stadium of about $ 400 million in nowhere
A stadium of about $ 400 million in nowhere!
Saskatchewan Raffiders of the Canadian Football League may set up a stadium in a remote area of the country, which may even pay off…
The construction of an indoor stadium in the center of Regina, home to the Saskatchewan Roughriders group, is technically feasible and will cost $ 386.2 million, including construction costs, land, consultants and furniture, according to a report released today. The possibility of installing a roof
Folding will add another $ 45 million, and total costs will exceed $ 430 million.
The study, which examined the feasibility of the project, was launched seven months ago with the funding of the regional, state and municipal authorities in addition to the group, which is interested in replacing its old stadium in Regina, the capital of Saskatchewan. According to the report, a new stadium could generate an operating profit of more than $ 1 million if there are 31 events a year, for example, the stadium can reach an annual profit if there are 11 Canadian Football League games, Three medium-sized and four small and eight other events such as conferences and exhibitions.
s for the main question of who will pay for the construction of the stadium, the report says “additional work is required to summarize the distribution of costs and risks” if the project is approved. Wladjauff told reporters that the decision to build the stadium will be made in late spring, and the construction is expected to take three years and the impact on the province’s GDP will be $ 195.5 million.
The site that is envisioned for construction is the current location of the Canadian Railway Railway (CP). According to the report, the company plans to move the 81-square-meter garage west of the city, apparently until the fall of 2012, depending on the approval of the regulator. The railway company has also agreed, in principle, and subject to conditions and approvals, to sell the site in the center of the city, given several factors related to the passage that must be solved, “the report said.
The report proposes building two new public sites – two loaves that will surround the stadium, and not all of the site is intended for the construction of the stadium, and part of the land can be used for the construction of private homes or for commercial purposes.
Our company offer economical solutions for building stadiums in low cost please learn more from: www.seatupafrica.com
Acoustic Wooden panels
Perforated acoustic panels provide a modern, light and luxurious look and enable cladding that enables high acoustic efficiency due to their structural features. Large plate finishing options according to project requirements. All the our acoustic panels are manufactured from quality raw materials, refractories according to the EN strictest standards.
In order to achieve good acoustic results in the spaces of the room with an impressive aesthetic combination the perforated acoustic panels are made of MDF plates with thickness of 3 options: 8mm,12mm,18mm (including a 0.2 mm thick black acoustic fabric in the behind), and are technically efficient in absorbing noise.
At the design level, the cladding panels provide a fine linear, qualitative and discrete aesthetic.
Suitable for halls with high acoustic requirements such as: Auditoriums, conference halls, Library and all other kind of public buildings.
Applications area: Wall and ceilings
Dimensions: for Ceiling: 600 x 600 mm – for Wall: 600 x 1200 mm or according to demend.
Panel thickness: 3 options: 8mm,12mm,18mm (including a 0.2 mm thick black acoustic fabric in the behind)
Materials: MDF 18 mm thick MDF base boards, possible finish in melamine or veneer for those who have the budget to invest in venner which is almost double price from the price of melamine finish.
How do I decide what is the right model for me from all the options ?
There are really a lot of our models of acoustic wooden panels, but what you need to do is first of all get a professional demand from an acoustic engineer that tells you that he is interested in some sort of acoustics and therefore you can choose a model that meets the requirements. Note that some of our models have a technical graph that indicates the acoustic quality of the panel to which it belongs, it is likely that your selection should be based on the appropriate graph.
Then color is an infinite option and any color that comes to mind is possible.
If you do not have a technical requirement from an acoustic engineer that restricts you to a particular model,
then we can say that in general when it comes to a site that requires a high level of acoustics and dealing with heavy noises, we suggest that you select a panel that is both channeled and perforated.
But if your site needs to deal with an area that is not very acoustically problematic then you can choose a model that is perforated only.
You see now without being an acoustic engineer you already can understand that wooden panels with both channeled and perforated have higher acoustic value from perforated only,
also you know that the acoustic value of those panels is getting increased by how much intense the perforating is, so holes size and their intensity level are aspect that influence on their acoustic performance.
If you know that there is no requirement for high acoustic performance but the requirement is more for Innovative and interesting design so go ahead with our models such as Acoustima model 224, or 225, 226 or 227 and etc which are adding beautiful scene to your site!!! for full catalog with all models download here, We are waiting your request.
Ready to walk to the end of the hall
Ready to walk to the end of the hall
Governors of states and mayors have become hostages in the hands of billionaire groups who use threats and promise to leave to obtain public funding for building larger, more elaborate, and sometimes over-exaggerated facilities
In recent years Sacramento fans have become accustomed to the fact that they lead nothing, unless it is chaos. The team, which is considered one of the blackest holes in the NBA and is synonymous with a failed management culture, is still looking for the path to professional success – and as long as Derrickos Cazins is in the car, one can believe that it will eventually find it too. The first step to success is in the city center, where what is supposed to be the most advanced basketball court in the world is now being built.
The change in question has not yet affected what is happening on the park, but it began as early as May 2013, when Yavak Rannadiv, an American Indian billionaire who made his fortune as a software engineer, purchased the club. Golden 1 Center is the name of the new hall, which is currently being built in downtown Sacramento, at a cost of $ 550 million, which will jump to more than $ 1 billion if one considers the businesses and residences to be included in the huge complex Which according to the plan is supposed to change the face of the capital of California.
Watch on youtube the Stadium of sacramento kings
The auditorium will contain 17,500 seats for viewers to enjoy the best of technology. In addition to graphic interfaces connected directly to the various social networks, green building will correspond with the vegetation of the region, huge hanger doors that welcome the visitors and lead to a public square overlooking a luxury hotel and a board that will hurt the eyes.
“We are helping Sacramento to become the city of the future,” Rannadiv told NBC radio in Sacramento. “Once the fan enters the compound, our smart system will recognize him if he wants to, and it will be his job to follow his whim.” She would do more, when she led him to his chair and knew which food he preferred. “This will be the smartest and greenest building in the world,” continues Rannadiv, who will also provide practical solutions such as information about the services with the shortest turn, how long it will take to buy a cup of cola and the estimated time of departure at the end of the game.
While Chernadiv boasts of his team’s new and smart home, which is expected to be ready in 17 months, not everyone is satisfied with the ostentatious project, which is largely financed by public money. Funding for the sports stadiums has been in the headlines in the United States in recent years. While supporters argue that the money is directed to theaters and stadiums that encourage the economy and develop social and cultural life, opponents say there is no reason why countries and municipalities, most of which are in deficit, will finance sports halls owned by billionaires.
watch on youtube the Milwaukee Ripple Effect
The studies support the opponents’ position. While a new room may have a positive effect on trading in nearby areas, it is difficult to find the same effect in areas far from it. A recent study in Forbes examined the impact of the baseball stadiums built in Baltimore, San Diego, San Francisco, Denver, and Seattle on the local economy for 25 years. The study found no evidence that the stadiums improved the local economy, given that the money allocated for the construction could have been invested in more appropriate channels such as education, welfare and housing.
“We’re building a hall for two of the richest people in the United States,” said Jonathan Brustoff, a Wisconsin lawmaker, to the New York Times. “If aliens came here and saw what was happening, they would say, ‘What the hell are you doing? ‘”. “The owners of the group acted as if they had no obligation to the local people,” added David Bowen, also from the Wisconsin Commons. Tim Shea, the head of the Milwaukee Chamber of Commerce, believes that the hall in the city will soon contribute to the city’s life, and not necessarily in the economic context: “It gives the city an identity and uniqueness,” he explained. Which only a few weeks earlier had signed a $ 250 million cut in the University of Wisconsin budget.
Milwaukee is just the latest example of a city that has succumbed to billionaire demands and has given them hundreds of millions of dollars. While in Sacramento, Rannadiv enjoyed the support of Mayor Kevin Johnson, a former NBA player, the Bax owners, Wesley Addens and Mark Lasry, had to threaten to receive government money. The two really did not invent the method. Most of the sports stadiums in the top four leagues were established with public funding. Forbes reported that between 2000 and 2010, the American public invested at least $ 12 billion in halls and tools. As well as the profits already generated from the halls – mainly through sponsorship agreements and franchises for food sales – from the groups’ collections to their pockets. The only payment that the state receives back is annual fees, which will cover the investment in hundreds of years.
While the owners of sports teams in the United States enjoy both lucrative and lucrative business and public funding that helps them increase future revenue, state governors and mayors remain hostage. In recent years, NBA players have begun to play a special game – “Give me a hall, or I leave for Seattle,” call it, and billionaires, as the billionaires do, do not stop forever.
No public figure is interested in signing the departure of a professional sports team. Seattle is still struggling to recover from the SuperSonics’ departure in 2008, and Los Angeles has yet to overcome the departure of Rames in 1995. Therefore, these two cities are used as leverage by group owners. “Who will be the next group to pretend to be going to Seattle unless the city does not pay for its shiny new room?” Bill Simmons said on Twitter. “It’s amazing that 2015 billionaires are still able to push cities and countries to build them.” As it seems, this crooked reality is unlikely to change anytime soon.
Now watch what John Oliver has to say about the stadiums in the United States
The favorite 3D Acoustic panels
The favorite 3D Acoustic panels will be those one that have unique design and innovative ideas but they also must to be at the same time significant acoustic value panels that will improve the acoustics on your site, in your cinema hall or in the Auditorium or in whatever building that you have even if its a private house or any kind of public building.
And it’s time to introduce you to the five (5) shapes we’ve molded into three-dimensional acoustic panels.
most of them inspired from the nature but some also inspired by the sweet food that we like, and here are they :
- Acoustima spin® Panel in the size of 60×60 or upon request. The panel look like a spin shape inspired from the shape that appear in the nature. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet.
2. Acoustimacrater® Panel in the size of 60×60 or upon request. The panel look like a carter shape inspired from the shape that appear in the nature. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet.
3. Acoustima waterwave® Panel in the size of 60×60 or upon request. The panel look like a wave in the sea inspired from the Ocean. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet.
4. Acoustima Pyramid® Panel in the size of 60×60 or upon request. The panel inspired from the pyramid shape. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet
5. Acoustima Waffle® Panel in the size of 60×60 or upon request. The panel inspired from the famous belgian sweet waffle. As all of our 3D acoustic panels this panel as well made from foam injection and covered with acoustic fabric. for technical information here: datasheet
Feel free to offer us new shapes for 3D acoustic panels we will be able to apply any shape you like.
In Acoustima® we work for you to fulfil your dreams!