THE RESPONSIBILITY OF THE SEAT MANUFACTURER AND THE RESPONSIBILITY OF THE CONTRACTOR
Our responsibility as the seats factory is to manufacture the seats according to the most advanced standards and according to the drawing
and the data sheet which we submit to our customer.
The role of the contractor who orders from us the seats is to provide us with reliable information regarding the conditions in which the
seat is intended to be installed, contractor must give us a precise drawing of the hall that matches the reality on the ground.
The contractor’s responsibility is to remind us the small details and comments that his client requests.
Our responsibility is to manufacture according to the technical data sheet and drawing we provide to the customer.
Our responsibility is to meet the predetermined schedule, whether if it is 14 days, 20 days or 30 days…
The contractor responsibility is to inform his client the schedule depending on the time we agreed between us in advance, however
the contractor must add extra time given since there are factors that affect the transport of goods and delivery of the goods which are not
dependent on us as an Manufacturer.
Only if everyone keeps their responsibilities the customer will be happy, but you have to be careful to keep the small details because the
small details are what makes the job successful and perfect than just good work or bad work.
SEAT MANUFACTURER: SeatUp Turkey® +905427196712 www.seatupturkey.net email@example.com
Waiting Chairs in Bank
Waiting chairs are a very important thing.
Waiting chairs are used in banks, hospitals and clinics, offices, schools and educational institutions, university colleges and of course
airports and bus and train stations.
We offer a wide range of seating solutions usually seating 3, 4 or 5 seats on one bench,
although you can of course design the seats in pairs or any other way you like.
Our recommendation is not to add to the benches more than 6 seats per each, that is for the simple reason that if you want to move the
benches afterwards they will be too heavy. Therefore it is recommended for 4 seats in each bench.
Another important thing to think about is a shelf that can be produced between the seats in order to be able to put newspapers and
magazines for the convenience of those waiting, this option suitable for places and spaces that want to create a more pleasant home
Our range of options is unlimited, for those of you who are looking for a special design, of course we have our Snail Bench which is our
premium product, The Snail Bench very convenient and has interesting design and can also be combined in it a connection for charging
mobiles telephones and lap top, and etc. Read more about our snail:
In any case, there are those who will also prefer leather or fabric sofas as waiting seats, which is also our area.
We produce hundreds types of sofas every year, according to project demand and customization requests.
When you have a project that requires waiting areas, waiting seating and waiting chairs, do not hesitate to contact us and we will be happy
to produce the solution you need.
The V seat model is the most multifunctional conference seat model and most affordable seat!
Our V seat model it is a series of 5 main models which can apply with many kind of version as well.
What make these seat models to be so successful? Because it is a very strong seat with a warranty up to 10 years at a very, very affordable price.
Another main reason for these seat models success is the fact that they are very multifunctional! you can offer them for conference hall
But at the same time to Cinema as well, yet there also so popular as VIP seats in Stadiums!
The seat has leg made of metal profile in “V” shape, the sides of the seat can be open or close according to the customer’s wishes.
in generel we produce these seat models as shared armrest and the middle seat has open side and at the end and the beginning of each
row the side of the seat is closed in order to achieve aesthetic performance.
For the shape of the backrest we have more 6 or 7 options as you can review from the link: The basic series.
It is it is possible to have the back of the backrest with plastic shield or as upholstered. same for the chair seat it can apply with plastic
shield or as upholstered. Armrest can apply made of hard plastic and straight or with cup holders, as well wooden armrest is available.
Another prominent advantage of these model seats is that they can be produced with a very short time, for example the BS V1 model can
be produced as 1000 seat per week.
So when you have a project that requires a reasonable price and a very short supply time along with a long term warranty requirement and
massive strength then it is clear that your choice will be one of our V series. So check out this series and you can count on it.
SeatUp Turkey® +902249996707 +905427196712
The Swing Away system is the ultimate solution for both school desks and as fixed seating in lecture hall, colleges and universities.
There are a wide range of seat and finish options, The swing away can be tailored in order to meet the specifications of your unique project.
The swing away system can be apply as Single or with dual seat or for multi seats.
The main idea is that the tables and the seats are sharing the same leg, the result is that the chairs will be located above the floor,
that’s why also some people like to call this model “the flying seat“ the advantage of the chairs not toching the floor is to achieve silent
and tidy look of the class, and second it make you to save lots of energy on the cleaning of the classes since the floor is always ready to
wash and clean and no need to turn the chairs on the tables like in the old schools,
So that will save you human power and time,
The Swing away system is your solution for class rooms for school desks and for seating in lecture hall, colleges and universities.
A classic and successful auditorium seat
What makes our seat model called EG900 so successful is its simple, clean design. This seat is one of our best selling models.
The seat, which is 100 percent padded on all sides with no wooden backrest, and no wooden armrests, only quality fabric on all sides.
It is possible to add an anti-panic desk to this model.
But many times customers are looking for a smooth auditorium seat without a writing pad. Such a seat as this model gives a formal and
orderly appearance to the hall, and this is what the customers sometimes want.
One picture is better than a thousand words:
In addition to the anti-panic writing surface which can be added to this model, we can also add a plastic cup holder to the armrest,
As well as adding wheels to the seat legs so that the seat can be moved from place to place in the hall.
In fact, this seat is very suitable for music rooms where it is necessary to move the seats from place to place.
We are waiting for your request regarding this model. A fabric catalog can be received from us by DHL.
collection 2018 of Auditorium seats
The 2018 collection of auditorium seats will be focused on an anti-panic desk (table).
For many years we were used to see auditorium seats with a regular folding table or with a table that folded into the arm of the seat.
But this has become obsolete. The demand today in most of the halls is for seats with anti-Panic tables (desks).
That’s why the 2018 collection of auditorium seats will probably include only seats with anti-Panic desks (tables) .
Another important feature of the 2018 auditorium collection is an emphasis on seats with an electrical socket next to the armrest.
It will be useful for charging mobile devices, and especially for the laptop, which now replaces the notebooks and books of the past.
In terms of foot legs of the seats most customers prefer a full size leg so there is no visibility of the metal leg, this is due to design
consideration. Another option is to put a plastic cork on the foot leg of the seat so that will hide the visibility of the connecting screws of
the foot leg of the seat.
In terms of fabric selection, it is possible to see that in the 2018 collection the requirement is a thicker padding. This is done by increasing
the thickness of the lamination material of the fabric, which is actually the spongy coating of the back of the fabric, as the thickness of the
lamination grows, so the upholstery fabric becomes thicker and more comfortable. Laminating also affects the acoustics of the seat as well
as the isolation of the seat from cold and heat.
Many customers prefer wooden and non-plastic armrests. However, for the writing surfaces, many customers require a plastic or wooden
writing surface with many layers of lamination or heavy paint to create a surface that looks like a heavy table, but the material is basically
a laminated wood.
In the 2018 collection of auditorium seats you can see much more demand to print a logo on the back of the seat. Print a color logo gives
the seat a more representative appearance and highlights the importance of the institution in where the seats were installed.
Beyond that, you can see that 2018 customers already give greater priority to the quality of the auditorium seats than the price.
In the past, customers were very focused on achieving a cheap price but over the years they learned that a cheap product meant a product
that did not hold for years, which causes great disappointment among customers who will prefer next time to work with another supplier
or company and that is why better to choose a quality seat that emphasizes the highest standards of seat production with an emphasis on
the quality raw materials which we use during the manufacturing of the auditorium seats in our factory.
You are invited to contact us for visits to our factory and our exhibition room, our Showroom.
And do not forget ! We have a lot to offer you in our 2018 collection of Auditorium seating.
conference seats with microphone and table
A conference seat or an Auditorium seat with a microphone and a table is one of the most complicated areas in the auditorium seating.
And for that you need a good manufacturer with experience who can handle all the challenges that such a project poses.
We are able to adapt most of our seats models according to the type of microphone you will be requesting to install in the seat.
All you need to do is to give us a good diagram of the cable and the microphone that is going to be used, and preferably if you can send us
a physical example of the cable.
We have developed many models of conference and auditorium seating with microphone and will be happy to share our knowledge.
In addition to the microphone, you can also install a socket that is suitable for connecting a charger for a mobile phone or connecting a
charger for a laptop and more…
For the table in a seat with a microphone it is recommended to be apply as anti panic table system or if the budget and the space
allows it so you can also set a separate table from the seat in front of the seat and allows comfortable work space.
If you have any questions about conference seat or an Auditorium seat with a table and a microphone, please contact us and we
will be able to produce any model according to your demand.
Our mass production of stadium seats currently focuses on our two main models which one of them is STADIUS220 and second one is
STADIUS401 we have been producing both of these models for decades and in mass production quantities for international stadiums and
government projects worldwide.
The demand for these stadium seats, especially as we said of the models mentioned above, only increases and increases over the years,
we are able to produce more than 6,500 seats per week from each one of these models.
That is mean, within one month we will be able to supply about 30,000 seats from each one of these models.
Which means that in a period of 7 months we can produce more than 200,000 seats from each one of these models.
Many costumers are askıng us how many seats of the model STADIUS220 can enter in one 40 feet container?
So here are all the answers:
Also many costumers are askıng us how many seats of the model STADIUS401 can enter in one 40 feet container?
So here are all the answers:
Mass production of stadium seats That’s what we specialize in! mass production of stadium seats That’s what we love to do!
To do mass production of stadium seats this requires strict adherence to high production conditions that we maintain in our factory.
To do mass production of stadium seats requires high level inspection and a commitment to ensure that the seats will be 100% equally
same in shape and in color. And this is our job in any production process of stadium seats and chairs.
When it comes to the mass production of stadium seats we offer you not to take any unnecessary risks and work with us to achieve the
success of your project hundred percent and without manufacturing errors.
Mass production is not a child’s play and you can not allow yourself to make a mistake in your manufacturer’s choice.
This is also the quality of a product that must be under the highest criteria and at the same time seats that must be provided in time
according to the agreed agreement. We have already heard of many cases where the seats were missing in time and games had to be
delayed and the contractor went into thousands of dollars penalty just because his manufacturer did not meet the schedule.
Mass production of stadium seats under the best conditions is our responsibility and our mission so definitely contact us when you need
mass production and fast production on time of stadium seats.
At the same time, it is possible to produce the seat with handrests and cup holders that matches the size of the water bottles.
Our players seat is based on our VIP 500 model.
We are also capable of producing a complete solution for the players’ shelter, which includes the bench and the roof of the shelter,
which is resistant to the sun and is resistant to stone and object damage.
according to FIFA and EN standards players’ shelter must to contain 11 seats for the main players plus replacement players and the team
staff of the group. The recommendation is in total 18 seats per players’ bench shelter.
Please review the photos below from our last Stadium project.
Well the best you can do is to go and visit the company before you place an order…
or if you cant go by yourself send someone you know to do that for you… if you also can not do that so try to find if their address is on
Google map or not.
That will give you some information. So be careful and don’t forget to check well who is the company you are working with before placing
We are here and we are open for your visit in both our factory and our showroom in Bursa an hour drive from Istanbul.
SeatUp Turkey® & Acoustima®
Altınova Mh. İstanbul Cd. Buttim iş Merkezi
C Blok No: 424/5 Ofis No: 3160
Osmangazi / BURSA / TURKEY
Zip code: 16250
Protection & Safety in business ?
We take full responsibility for the proper products packaging
We take full responsibility for no damage in products
We take full responsibility for fast delivery schedule – Maximum 30 days till your port / door.
We accept payment by L/C (letter of credit) or by 50% advance and balance with bill of lading.
We’ll be happy to do help you with the installation in your country free of charge!
We’ll be happy to give you a technical support for free in any time for more than 5 years!
SeatUpTurkey is the only company in Turkey that give 5 years warranty for Auditorium & Stadium chairs!